500W 28Khz Ultrasonic Welding Oscillator with 2pcs Pizoelectric
Ceramics
Description:
The ultrasonic oscillator system consists of three parts:
Transducer (TRANSDUCER), Amplifier (also known as secondary rod,
horn, BOOSTER), welding head (also known as welding, HORN or
SONTRODE).
Specifications:
| Model | QR-3828-2BZ-BJL |
| Frequency | 28khz |
| Output power | 500 watt |
| Ceramic disc Diameter | 38mm |
| Qty of ceramic discs | 2pcs |
| Capacitance | 3.7-4.2nf |
| Application | Ultrasonic Plastic Welding machine |
The principle of ultrasonic plastic welding:
When ultrasonic waves act on the thermoplastic plastic contact
surface, high-frequency vibrations of tens of thousands of times
per second are generated. This high-frequency vibration reaches a
certain amplitude, and the ultrasonic energy is transmitted to the
weld zone through the upper weldment, because the weld zone is two
At the interface of the welding, the sound resistance is large, so
local high temperature is generated. Moreover, due to the poor
thermal conductivity of the plastic, it can not be dissipated in
time and gather in the weld zone, so that the contact faces of the
two plastics melt rapidly, and after a certain pressure, they are
integrated into one. When the ultrasonic wave stops, let the
pressure last for a few seconds to solidify it, thus forming a
strong molecular chain for welding purposes, the welding strength
can be close to the strength of the raw material. The quality of
ultrasonic plastic welding depends on the amplitude of the
transducer welding head, the applied pressure and the welding time.
The welding time and the welding head pressure can be adjusted. The
amplitude is determined by the transducer and the horn. The
interaction of these three quantities has a suitable value. When
the energy exceeds the appropriate value, the melting amount of the
plastic is large, and the welding material is easily deformed; if
the energy is small, the welding is not easy, and the applied
pressure is not too large. This optimum pressure is the product of
the side length of the welded portion and the optimum pressure per
1 mm of the edge.
500W 28Khz Ultrasonic Welding Oscillator with 2pcs Pizoelectric
Ceramics
